YIKE GROUP 1200X2600MM Chain feeder Printer Slotter Carton Box
Making Machine
Printer unit
● Gear enclosed spray lubrication system, keyless drive design, so
that accurate long-term chromatic unchanged. High-speed Ink
Printing Slotting Machine Manufacture.
● Frequency control system to control becomes easy and flexible.
Each group of printing unit is equipped with jogging button for
easy control and loaded rubber plate.
● Each printing unit can be electrical separation. Printing
Slotting Machine.
● High-precision anilox roller, diameter 195mm. The textured
density of anilox roller is 180-300 lines / inch, to ensure the
printing effect is clear and beautiful.
● Ink supply system is pneumatic diaphragm pumps, high efficiency,
Flexo Printing Slotting Machine saving ink. Automatic cycle supply.
Cleaning with clean water can be.
● Automatic uniform system to keep the anilox roller quit. When the
machine stop,the anilox roller and rubber roller could running
independently for transmission ink and prevent the ink dry out.
● The rubber roller is use high quality hard wearing rubber,and
with the middle of a relatively high high-precision grinding. Semi
Automatic Carton Flexo Printing Slotting Machine.
● Phase institutions is 360-degree Electric adjustment, ergonomic
design.
Specification:
| Model | YK-1226 |
| Max feeding paperboard size | 1200 mm * 2600 mm |
| Max effective printing size | 1200 mm * 2400 mm |
| Min process paperboard size | 450 mm * 550 mm |
| Thickness of the printing plank | 7.2 mm |
| design speed | 80pieces / min |
| economical speed | 60 pieces / min |
| Precision of the printing | ±0. 75 mm |
| Printing rolling axle circle-oriented regulating | 360 degree revolving |
| Printing rolling axle-oriented regulating | +/-10mm |
Slotter unit
● Gear enclosed spray lubrication system, keyless drive design, so
that accurate long-term chromatic unchanged. High Speed Flexo
Printing Slotting(stacking Unit)
● Phase institutions is 360-degree Electric adjustment, ergonomic
design
● Four-blade sync adjustment for carton height.
● Serrated slotted cutter. Thickness: 7mm. Cutting angle blade
width: 40mm.
Die Cutting Part
● Die cutting roller for the high quality steel materials,30mm
thickness, balance correction, hard-chrome plating
● Wallboard for high-quality cast iron material,50mm thickness, and
large processing center production.
● Soft-roll automatic grinding institutions to pouches repeat
usage,grinding3-4times;
● Line speed automatic compensation to ensure that each batch of
cardboard boxes full of die-size line;
● Use Imported Polyurethane soft rubber, ease of installation, can
cut 12000000 times.;
● Mechanical soft roll about 40 mm lateral movement ,the pads wear
uniform;
● 40cr material the use of grinding gears for 6,low noise long
life;
● Die cutting roller cylinder automatic separation devices to
reduce wear pouches.
