Professional 2 Ply Corrugated Cardboard Manufacturer, Semi Auto
Single Facer Line
Specification
ZJ-F Electric shaftless mill roll stand
- Symmetrical structure can also install two bundles of paper at the
same time,Paper can be used for non-stop for a job；Adopts
mechanical drive to complete the paper clamping, lifting, loosen,
move on, around translational motion, etc.
- each shaftless mill roll stand is equipped with two pieces of paper
guide, two set of paper car；paper guide the use of channel 14 and
the guide post weld,paper car adopt 10mmwelded stell,the length of
track is 4500mm.
- manual dics brake,add screw following
- electric elements centralized control the electric elements,expand
chuck.
1,Backstands action mode:mechanical electric operation
2,the range of paper jams:maximum:1600mm minimum:600mm
3,the diameter of paper jams:maximum:￠1400mm minimum:￠400mm
4,Unilateral maximum load:maximum2000Kg
5,Powered motor parameters:
①Paper jams motor550W×4set 380V 50HZ short(S2)working standard
②lift motor 1.5Kw 380V 50HZ short(S2)working standard
- Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | Material |
| Motor | Hebei Hengshui | |
| Reducer | Shandong Dezhou Jin bu huan | |
| Contacts | Chint or De li xi | |
| Chuck | Xusheng | 3 inches, 4 inches shared |
| Wallboard | Production own | HT200 |
ZJ-V5B Hydraulic shaftless mill roll stand (Option)
- Adopt hydraulic drive to complete the paper clamping, loosen,
remove for the medium, translation left and right and others,the
lifting of the paper adopts hydraulic drive.
- Brake adjustable adopts multipoint braking system.
- Every stand matched two sets paper car , and they can paper on the
both sides at the same time.
1,the range of clamping paper:MAX1600mm MIN1000mm 2,clamping
diameters:MAX￠1500mm MIN￠350mm
3,main shaft diameter of paper holder:￠242mm 4,gas source work
pressure(Mpa):0.4---0.8Mpa
5,equipment size:Lmx4.3*Wmx1.8*Hmx1.6 6,single weight:MAX4000Kg
- Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa 2,lifting hydraulic
cylinder:￠100×440mm
3,Clamping hydraulic cylinder:￠63×1300m 4,hydraulic station motor
power:3KW --380V -- 50Hz
5,solenoid valve voltage:220V 50 Hz
SF-280S Fingerless type single facer
- Regular technical parameters:
1,effective width:1800mm
2,operation direction:left or right(determined in accordance with
customer plant)
3,design speed:100m/min working speed:40m/min
4,temperature range:200—260℃
5,corrugated flute:(UV type or UVV type)
- Roller diameters parameters:
1,diameter of corrugated roller: ￠280mm
2,diameter of pressure roller: ￠284mm
3,diameter of glue roller: ￠216mm
4,diameter of preheat roller: ￠320mm
- Powered motor parameters:
1,main drive motor:7.5Kw rated voltage:380V 50Hz Continuous (S1)
working standard
2,suction motor:7.5Kw rated voltage:380V 50Hz Continuous (S1)
working standard
NC Computer sheet cutter machine
- General technical parameters:
- Working width:1600mm
- Mechanical speed:60m/min
- Minimum cut length:300mm
- Maximum cutting length:9000mm
- Cutting accuracy: uniform speed ±1.5mm
Rotary paper receiving machine
- The machine receiving the highest speed 70m / min.
- The maximum length of the machine to receive paper 1600mm.
- The machine can achieve automatic points without stopping,
automatic stacking, automatic sub-stacker.
- The maximum stacking height of the local stacking unit is 100mm.
- The automatic stacking machine covers an area of small, and save
manpower, is the best choice for low-speed machine.
| YK-280 SINLGE FACER LINE |
| 1 | MILL ROLL STAND A: HYDRAULIC TYPE B: ELECTRIC TYPE | TYPE | MARK |
| B | ELECTRIC TYPE |
| 2 | SINGLE FACER A: STEAM HEATING B: ELECTRIC HEATING | B | ELECTRIC HEATING |
| 3 | NC SHEET CUTTER A: COMPUTER HEAVY TYPE B: ELECTIRC HEAVY TYPE C: ELECTIRC LIGHT TYPE | A | COMPUTER HEAVY TYPE |
| 4 | RECEIVER | Y | RECEIVER |
| INQUIRY | ELECTRIC MILL ROLL STAND + ELECTIRC HEATING SINGLE FACER + COMPUTER
SHEET CUTTER + RECEIVER |
| OFFER | |
| PAYMENT | 30% T/T IN ADVANCE, BALANCE PAID BEFORE SHIPMENT |
| PRODUCTION | WITH 60 WORKING DAYS AFTER RECEIVE DEPOSIT |
