Steam Heating Cardboard Making Machine -3 Ply Corrugated Carton
Production Line
main technical parameters and requirements in production line
note:Production line speed test paper should meet the following
requirements:(the surface temperature of the equipment is not less
than 172℃)
﹡Paper rating of not less than B grade ﹡Paper moisture content of
about:11%±2%
﹡top paper:100—250g/m2 ﹡core paper:100--250g/m2
﹡corrugated paper:100—200g/m2
Flute-type combination:A ,C, B, E(as customers’ requirement)
Steam the necessary requirements:
﹡amount of steam 2500—3000Kg/Hr ﹡the highest pressure:1.2MPa
﹡common pressure:0.8-1.1MPa
Customer-owned section
1,steam heating system:proposal with 2000Kg / Hr of a steam boiler
pressure:1.25MPa steam pipeline.
2,air compressed machine,air pipeline,glue conveying pipe.
3,power supply,wires connected to the operation panel and line
pipe.
4,water sources,water pipelines,buckets and so on.
ZJ-F shaftless mill roll stand
Structural features:
★Symmetrical structure can also install two bundles of paper at the
same time,Paper can be used for non-stop for a job；Adopts
mechanical drive to complete the paper clamping, lifting, loosen,
move on, around translational motion, etc.
★each shaftless mill roll stand is equipped with two pieces of
paper guide, two set of paper car；paper guide the use of channel 14
and the guide post weld,paper car adopt 10mmwelded stell,the length
of track is 4500mm.
Mainly purchased parts, raw materials and origin:
Name of main parts | Brands or place of origin | material |
motor | Hebei Hengshui |
|
reducer | Shandong Dezhou Jin bu huan |
|
contacts | Chint or De li xi |
|
chuck | Xusheng | 3 inches, 4 inches shared |
wallboard | Production own | HT200 |
SF-280S fingerless type single facer
Structural features:
★Adopt vacuum suction structure, with high pressure strong
blower.Suction with silencer.Gas supply and electrical control
cabinet to focus on the same operation cabinet,not less than 1.5
meters away from the host,Fully enclosed full operation side.
★base and wallboard cast iron wall,Wallboard
thickness130mm.universal Joints.
★corrugated roller material adopt 48CrMoalloy steel,quenched,Laser
hardening,Surface finish,main roll of corrugated diameter¢
280mm,surface hardnessHRC60degree above.The key parts of the tile
and pressure roller bearings Wafangdian produce high temperature
bearings.
regular technical parameters:
1,effective width:1800mm 2,operation direction:left or
right(determined in accordance with customer plant)
3,design speed:100m/min 4,temperature range:200—260℃
5,corrugated flute:(UV type or UVV type)
